Search

admin@aosuotrade.com

86-0311-68015506 ; 86-15032065295

86-0311-68015506 ; 86-15032065295

Shijiazhuang Aosuo International Trade Co., Ltd.       冀ICP备19004403号-1        Powered by www.300.cn

Shijiazhuang Aosuo International Trade Co., Ltd.

>
>
Discussion on the full contact of the prosthetic receiving cavity and the bearing of the stump

News details

Discussion on the full contact of the prosthetic receiving cavity and the bearing of the stump

Page view
[Abstract]:
When amputees walk with lower limb prostheses, people always tend to pay attention to the harmony of gait. Only when there are swelling, discoloration, load-bearing and blood circulation problems in the residual limb, people care about what happened to the residual limb. The changes of the stump are closely related to the reception cavity which absorbs and contains the stump.

When amputees walk with lower limb prostheses, people always tend to pay attention to the harmony of gait. Only when there are swelling, discoloration, load-bearing and blood circulation problems in the residual limb, people care about what happened to the residual limb. The changes of the stump are closely related to the reception cavity which absorbs and contains the stump.

The receptive cavity is an important part of the prosthesis. It directly contacts with the stump, supports the weight of human body and controls the movement of the prosthesis. Whether the prosthesis is comfortable or not depends on whether the receiving cavity is suitable. The receptive cavity is an important structure that affects the comfort and function of the prosthesis. Full contact and large-scale load-bearing of the stump are the requirements of modern prosthesis assembly. Unfortunately, it is often overlooked.

Bearing and movement are the basic functions of lower limb prosthesis. The reliable "connection" between the stump and the receiving cavity ensures the realization of the function of the prosthesis. Any tiny "dummy joint" and "piston movement" between them will hinder the amputee's precise control of the prosthesis, thus reducing the stability of standing and walking, and increasing the patient's energy consumption. The full contact between the stump and the receiving cavity is helpful to achieve the goal of firm connection between the stump and the receiving cavity. Full contact requires that the residual limb can at least contact and bear certain pressure. Otherwise, before installing the prosthesis, we should consider to improve the quality of the residual limb by conservative or surgical methods.

Wearing the ideal prosthesis bearing a large degree of stump, the amputee should be able to stand on the bottom of the receiving cavity with the stump, just like standing on the ground before the amputation. *It is an important condition for the prosthetic limb to tend to physiology to use the stump bearing to a large extent. It is not only of great biomechanical significance, but also through the contact and bearing of the stump, the amputee's sensory nervous system can directly feel the important information of the pressure and movement from the bottom.

The weight bearing of the stump realizes the weight bearing of the skeleton of the stump. It has the physiological function of preventing decalcification (passive osteoporosis). For child amputees, it can also stimulate the growth of stumps.

The bearing capacity of the stump depends on the height of the amputation and the quality of the soft tissue, as well as the surgical technique. Among the amputees, the load-bearing capacity of the long stump is less than 20% of the body weight; the large section of the middle stump can generally bear 30-60% of the body weight; the load-bearing capacity of the short stump is higher, even up to 100%. The stump of the thigh has about 20-30% of the load-bearing capacity. All kinds of stumps obtained by amputation of joint, osteoporotic part near joint and foot amputation with part of sole reserved can fully bear weight after short time of practice, and have 100% bearing capacity.

The problems of full contact and load bearing of leg and thigh prosthesis are prominent in the assembly of lower limb prosthesis. The lower leg prosthesis and the thigh prosthesis can free the upper part of the stump by supporting the upper part of the stump, such as the proximal tibia, thigh or Ischia. This will inevitably lead to venous and lymphatic reflux disorders, resulting in swelling of the stump. The position of thigh and leg amputation passes through tubular bone, and the bearing capacity of the stump is limited. It is inevitable for the prosthesis to reduce the load of the stump by carrying the weight on the upper end of the stump, but the degree of the load exemption should be reduced to a small degree, so that the stump can bear the load to a large extent. In fact, the bearing capacity of the stump is higher than the general imagination.

The bearing capacity of the stump in the prosthesis also depends on the shape and material of the receiving cavity. The technology of silicone leg and thigh prosthesis provides conditions for full contact and bearing of stump in material and technology. However, in today's lower leg and thigh prosthesis assembly, there are still many receiving cavities which do not meet the requirements of full contact and residual load-bearing.

Some so-called "high-grade" leg prostheses, although using very high-quality and expensive materials, have not achieved full contact, let alone bearing of the stump. The huge space between the end of the stump and the base of the receiving cavity is the root cause of the discoloration and stasis of the stump. It is easy for amputees to know if the receiving cavity is in full contact as long as the bottom end is pressed lightly after the inner sleeve is put on. Some amputees spontaneously pad cotton threads on the bottom of the receiving cavity to maintain contact and pressure with the stump. Their knowledge of total contact has surpassed that of prosthetic technicians. Expensive materials do not represent the quality of high-grade prostheses.

The condition of thigh prosthesis is a little better. Although there are still a large number of suction receptacles without end contact, full contact receptacles have been widely used.

There is a large gap between the bottom of the suction receiver and the end of the stump. It forms a confined space. The negative pressure generated in the confined space will absorb the receiving cavity on the stump and play a role of suspension. This is the reason why the receiving cavity was widely used in the early stage. The external pressure on the stump is less than that on the side and mouth of the stump. The lymphatic and venous return is blocked, which inevitably leads to the edema of the stump. In spite of its serious disadvantages, the receiving cavity is still widely used in the assembly of thigh prosthesis. The main reason is that the fabrication technology of the receiving cavity is low.

Generally, the suction receiving cavity is single-sided (or double-sided), but there must be a large space at the bottom of the receiving cavity.

Its mouth shape will also be different. It has obvious ischial platform, which is the main stress point (as above).

The full contact receiver retains the advantages of the suction receiver and eliminates its adverse effects. The whole surface of the stump, especially the end of the stump, is in full contact with the receiving cavity. The end of the stump is subjected to axial pressure from the bottom of the cavity. In the process of walking, the blood is sucked to the end of the stump by negative pressure when the leg is swinging, and the blood is pumped out when the stump is compressed by the cavity bottom during the load-bearing support. The blood flows in and out of the stump end so repeatedly and alternately, which promotes the blood circulation of the stump.

Generally speaking, the full contact receiving cavity is double-sided, adopting the ischial inclusion type. There is no ischial platform in the receiving cavity type, and the force is scattered. The force is applied at the bottom of the residual limb as the case may be, and the skin surrounding force is increased.

It is very simple to check whether the thigh receiving cavity has achieved full contact and bearing of the stump. Under the state of bearing support, amputee can not only detect the gap and pressure between the end of the stump and the bottom of the receiving cavity through the air valve hole, but also judge whether the end of the stump is compressed.

In order to achieve the contact and bearing of the stump, on the one hand, the stump should have a good soft tissue coverage, on the other hand, the shape of the receiving cavity should be very close to the stump. This puts forward higher requirements for amputation technology and prosthesis assembly technology.

At present, the commonly used wearing method of thigh prosthesis has a very adverse effect on the full contact and the bearing of the stump. Nowadays, people use socks and air valve holes to wear artificial limbs. The soft tissue is pulled towards the stump. The bearing capacity of the stump is weakened. The air valve hole at the bottom of the receiving chamber even destroys the contact and bearing capacity. Only by filling the air valve hole at the bottom of the receiving chamber with a special air valve can full contact be achieved in the true sense. As long as there is no better way to wear the prosthesis, the bearing capacity of the stump will not be fully developed.

In our country, the lower limb prosthesis assembly has not been able to achieve full contact and bearing of the stump. There are not only cognitive reasons, but also the reasons of the prosthesis assembly technology, as well as the reasons of the amputation technology.

Many amputees and prosthetic technicians have not paid enough attention to this problem. They didn't realize that full contact and weight-bearing of the stump would affect the health of the amputee's stump and even the whole body. In order to avoid the trouble of the prosthesis assembly caused by the end tenderness of the stump, the prosthesis assembly technician stands on his own position rather than the position of the amputee, simply suspends the stump in the receiving cavity, and is not willing to pursue the goal of full contact and the weight bearing of the stump. Amputees are happy to accept it because they don't have tenderness.

Due to the lack of recognition and the lack of pressure from amputees (special consumers), the technicians lack the power to pursue advanced technology, and can not do full contact and bearing of the stump technically.

The whole contact and the weight bearing of the stump put forward higher requirements for the quality of the stump. Due to the lack of understanding of the development of prosthetic technology in the medical field, the surgeons did not create a residual limb that can achieve full contact and weight bearing at the stump. Bone spurs, neuromas, and bad scars from the operation hinder the application of the new technology.

We pursue the goal of full contact and stump bearing, so as not to affect the circulation of arteries, veins and lymph of stump, and not to hinder nerve conduction. If there is no full contact and bearing of the stump, it will lead to chronic blood circulation disorder and swelling of the stump sooner or later, until eczema, blister and chronic ulcer appear, especially serious skin changes in the type of the receiving cavity. As a result, the disabled limbs lose their load-bearing capacity, which can only be carried through the upper tighter mouth shape, forming a vicious circle.

In the initial stage of the bearing of the stump, the soft tissue at the end of the stump will rapidly shrink, so that the pressure of the receiving cavity bottom on the end of the stump will be reduced. In the initial stage of prosthetic assembly, the bottom of the receiving cavity should be continuously adapted to adapt to the shape of the end of the stump, so as to achieve a large degree of bearing of the stump.